New Released Exam 70-341 PDF 242q Free From the GreatExam (16-35)

GreatExam 70-341 study guide provides you everything you will need to take your 70-341 exam. The 70-341 exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

QUESTION 16
Hotspot Question
You need to identify which names must be used as the URLs of each virtual directory on the planned Exchange Server 2013 servers.
Which names should you identify? To answer, configure the appropriate name for each server in the answer area.

161
Answer:
162

QUESTION 17
You need to recommend which tasks must be performed to deliver email messages to the Internet if CH-EX2 and CH-EX3 fail to connect to the Internet.
The solution must ensure that all queued email is sent.
Which two tasks should you recommend? (Each correct answer presents part of the solution. Choose two.)

A.    Run the retry-queue ch-to-internet command.
B.    Create a new Send connector on a server in the Baltimore office,
C.    Modify the cost of the CH-to-Internet Send connector.
D.    Run the set-sendconnector -identity ch-to-internet -frontendproxyenabled Strue command.
E.    Disable the CH-to-Internet Send connector.

Answer: BE
Explanation:
The Baltimore and Chicago offices have independent Internet connections. Internet connectivity for the Los Angeles office is provided through Chicago.
Currently no mail servers in Chicago.Only in Baltimore and Los Angeles.
Once the transition to Exchange Server 2013 in the Chicago office is complete, all mail flow to and from the Internet will be managed centrally through that office by using a Send connector that has the following configurations:
– Connector name: CH-to-Internet
– Address space *
– Source servers: CH-EX2, CH-EX3
– Cost: 10
When you deploy Exchange 2013, outbound mail flow cannot occur until you configure a Send connector to route outbound mail to the Internet.
NOT A
Will not resolve the issue.
Use the Retry-Queue cmdlet to force a connection attempt for a queue on a Mailbox server or an Edge Transport server.
EXAMPLE 1
This example forces a connection attempt for all queues that meet the following criteria:
The queues are holding messages for the domain contoso.com.
The queues have a status of Retry.
The queues are located on the server on which the command is executed.
Retry-Queue -Filter {NextHopDomain -eq “contoso.com” -and Status -eq “Retry”}
NOT C
Modifying the cost will not fix the issue of CH-EX2 and CH-EX3 failing to connect to the Internet.
Cost is used to set the priority of this connector, used when two or more connectors are configured for the same address space. The lower the cost higher the priority.
NOT D
Modifying the send connector will not fix the internet connection from chicago mail server to the internet.
Use the Set-SendConnector cmdlet to modify a Send connector.
EXAMPLE 1
This example makes the following configuration changes to the Send connector named Contoso.com Send Connector:
Sets the maximum message size limit to 10 MB.
Changes the connection inactivity time-out to 15 minutes.
Set-SendConnector “Contoso.com Send Connector” -MaxMessageSize 10MB -ConnectionInactivityTimeOut
00:15:00
The FrontendProxyEnabled parameter routes outbound messages through the CAS server, where destination specific routing, such as DNS or IP address, is set, when the parameter is set to $true.
E
Need to disable the send connector from Chicago to the internet so that when a new send connector on the Baltimore server is created, email can be sent to the internet.

QUESTION 18
Drag and Drop Question
You need to create and configure a hierarchical address book (HAB) named Litware to reflect the company’s organizational chart.
Which three actions should you perform? To answer, move the three appropriate actions from the list of actions to the answer area and arrange them in the correct order.
181
Answer:
182

QUESTION 19
Drag and Drop Question
You are planning the upgrade to Exchange Server 2013.
You plan to perform the following tasks:
– Identify the number of email messages sent and received by the users in the current Exchange Server organization.
– Identify how many IOPS are required to provide adequate access to mailboxes for all of the users in the planned organization.
– Validate that all of the planned servers will meet the IOPS requirements of the planned organization.
You need to identify which tool must be used to achieve each task.
Which tools should you identify? To answer, drag the appropriate tool to the correct task in the answer area. Each tool may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
191
Answer:
192

QUESTION 20
You are testing the planned implementation of Exchange Server 2013.
After you begin moving several mailboxes to Exchange Server 2013, you discover that users on the internal network that have been moved are prompted repeatedly for their credentials when they run Microsoft Outlook.
You run the Get-OutlookAnywhere cmdlet on CH-EX4, and receive the following output:
You need to prevent the internal users from being prompted for their credentials when they connect to their mailbox by using Outlook.
Which property should you modify by using the Set-OutlookAnywhere cmdlet?

A.    IISAuthenticationMethods
B.    InternalHostname
C.    ExternalHostname
D.    ExternalClientAuthenticationMethod
E.    InternalClientAuthenticationMethod

Answer: A
Explanation:
InternalClientAuthenticationMethod is NTLM
Windows Challenge/Response (NTLM) is the authentication protocol used on networks that include systems running the Windows operating system and on stand-alone systems.
NTLM credentials are based on data obtained during the interactive logon process and consist of a domain name, a user name, and a one-way hash of the user’s password.
NEED TO CONVERT THE INTERNALCLIENTAUTHENTICATIONMETHOD TO BASIS NOT NTLM IN ORDER TO FIX THE ISSUE.
USE IISAUTHENTICATIONMETHODS PARAMETER IN ORDER TO ACHIEVE THIS.
Set-OutlookAnywhere
Use the Set-OutlookAnywhere cmdlet to modify the properties on a computer running Microsoft Exchange Server 2013 enabled for Microsoft Outlook Anywhere.
EXAMPLE 1
This example sets the client authentication method to NTLM for the /rpc virtual directory on the Client Access server CAS01.
Set-OutlookAnywhere -Identity:CAS01\rpc (Default Web Site) -ExternalClientAuthenticationMethod:Ntlm
PARAMETERS
The IISAuthenticationMethods parameter specifies the authentication method enabled on the /rpc virtual directory in Internet Information Services (IIS).
You can set the virtual directory to allow Basic authentication or NTLM authentication. Alternatively, you can also set the virtual directory to allow both Basic and NTLM authentication. All other authentication methods are disabled.
You may want to enable both Basic and NTLM authentication if you’re using the IIS virtual directory with multiple applications that require different authentication methods.
The InternalHostname parameter specifies the internal hostname for the Outlook Anywhere virtual directory.
The ExternalHostname parameter specifies the external host name to use in the Microsoft Outlook profiles for users enabled for Outlook Anywhere.
The ExternalClientAuthenticationMethod parameter specifies the authentication method used for external client authentication. Possible values include:
– Basic
– Digest
– Ntlm
– Fba
– WindowsIntegrated
– LiveIdFba
– LiveIdBasic
– LiveIdNegotiate
– WSSecurity
– Certificate
– NegoEx
– OAuth
– Adfs
– Kerberos
– Negotiate
– Misconfigured
The InternalClientAuthenticationMethod parameter
specifies the authentication method used for internal client authentication. Possible values include:
– Basic
– Digest
– Ntlm
– Fba
– WindowsIntegrated
– LiveIdFba
– LiveIdBasic
– LiveIdNegotiate
– WSSecurity
– Certificate
– NegoEx
– OAuth
– Adfs
– Kerberos
– Negotiate
– Misconfigured

QUESTION 21
Drag and Drop Question
You need to identify which external namespaces must be used for the Exchange servers in each office.
Which external namespaces should you identify for each office? To answer, drag the appropriate namespace to the correct office in the answer area. Each namespace may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.
211
Answer:
212

Case Study 3: A.Datum Corporation (QUESTION 22 ~ QUESTION 30)
Overview
A. Datum Corporation is an airline catering company that has 8,000 users.
A. Datum has three main offices. The offices are located in Detroit, Chicago, and New York.
Existing Environment
Active Directory Environment
The network contains an Active Directory forest named adatum.com. The forest contains a single domain. All domain controllers run Windows Server 2012. Each main office contains two domain controllers. Each office is configured as an Active Directory site. The functional level of the forest is Windows Server 2012.
Network Infrastructure
The offices connect to each other by using a dedicated WAN link. Only the office in New York and the office in Detroit connect directly to the Internet. Each office has a firewall.
The public DNS records for A. Datum are configured as shown in the following table.
The external interface for the firewall in the New York office is configured to use an IP address of 131.107.1.200 and to pass inbound traffic on port 25 and port 443 to EX2. The external interface for the firewall in the Detroit office is configured to use an IP address of 131.107.2.200 and to pass inbound traffic on port 443 to EX4. The Active Directory site is configured as shown in the Sites exhibit. (Click the Exhibit button.) Exchange Server Organization
A. Datum has an Exchange Server 2013 organization that contains two servers.
The servers are configured as shown in the following table.
Each server contains 15 mailbox databases. Users use the name mail.adatum.com to connect to their mailbox from the Internet. The users use the FQDN of the servers to connect from the internal network. AM of the users in the Detroit office have a mailbox hosted on EX2. The default email address policy contains a single email address format of @adatum.com. A separate Send connector exists for the Chicago office and the New York office. The local servers in each office are the only source servers in each Send connector. The New York office is configured as a hub site. Antimalware filtering is disabled on EX1 and EX2.
Problem Statements
A. Datum identifies the following issues:
– Users in the Detroit office report that sometimes, Microsoft Outlook takes a long time to open.
– During a recent storage failure, administrators failed to restore the latest backup and lost all of the email messages from the previous 48 hours.
– Users report that the email messages sent to some Internet domains are not received. Users in the Chicago office report that some of their email messages generate a non-delivery report (NDR).
– The help desk in the New York office reports that its most common Exchange-related task is to restore email messages that were deleted by users more than 14 days ago. The task requires time-consuming restore operations by the help desk.
Requirements
Business Requirements
A. Datum wants to provide users with the ability to access their email from Internet Explorer 10, even when the users are disconnected from the network. This ability must only be available if the users log on to Outlook Web Access by using the Private option.
Planned Changes
You plan to deploy three additional Exchange Server 2013 servers.
The servers will be configured as shown in the following table.
After the planned deployment, all of the mailboxes of the Detroit office users will be moved to EX3. All of the Detroit office users will use the name detroitmail.adatum.com when they connect from the Internet and the name ex4.adatum.com when they connect from the internal network.
Technical Requirements
A. Datum identifies the following technical requirements:
– All existing and future mailboxes must be limited to 5 GB of storage.
– Antimalware and anti-spam filtering must be enabled for the entire Exchange Server organization.
– If storage for the mailbox database fails, administrators must be able to recover email messages handled by transport services for to the last five days.
– Only the members of a group named Executives must be able to schedule meetings in a room mailbox named Boardroom. Meeting requests must not be moderated.
– All of the servers in the New York office that have the Client Access server role installed must be accessed by using a load balancing solution that can mark a server as down ifa specific URL on the server is unavailable.
Mailbox Creation Requirements
A. Datum identifies the following requirements for creating new mailboxes:
– All mailboxes must automatically have single item recovery enabled.
– All mailboxes must automatically have the Exchange ActiveSync feature disabled.

QUESTION 22
Hotspot Question
You need to recommend a solution to meet the technical requirements for mailbox size restrictions.
Which command should you include in the recommendation? (To answer, select the appropriate options in the answer area.)
221
Answer:
222

QUESTION 23
Drag and Drop Question
You need to recommend a solution to meet the technical requirements for email message recovery.
Which command should you include in the recommendation? (To answer, configure the appropriate options in the answer area.)
231
Answer:
232

QUESTION 24
You are evaluating the planned deployment of the additional Exchange Server 2013 servers.
You need to recommend changes to the DNS records to ensure that email messages are routed to the Detroit site if the servers in the New York site are unavailable.
What should you recommend adding?

A.    An MX record that has a preference value of 10 that points to EX4
B.    An MX record that has a preference value of 20 that points to EX4
C.    An MX record that has a preference value of 10 that points to EX3
D.    An MX record that has a preference value of 20 that points to EX3

Answer: B
Explanation:
NOT A C D
Need to change the value of the MX record to achieve the desired result.
Need to have a preference value greater for the 2nd preferred exchange mail server (Detroit) than the 1st preferred mail server.(New York)
That is it needs to point to the Detroit mail server (EX4) only if the New York mail server is unavailable.
B
Need to point to EX4 and have a higher preference value than 10. (The default value of New York mail server MX record)

QUESTION 25
You need to recommend a solution to resolve the issue of email messages not being received on the Internet.
What should you include in the solution?

A.    Modify the CNAME record.
B.    Add an MX record.
C.    Modify the TXT record.
D.    Add a pointer (PTR) record.

Answer: D
Explanation:
Detroit and New York users have direct connection to the internet but not Chicago users.
It appears that via a Send Connector Chicago email is sent to New York mail server.
Given this then the spf txt record listing the New York mail server is correct (131.107.1.200) and there should not be any issues with the Chicago email Once the planned changes have been implemented then the DNS txt record would have to accommodate the Detroit Mail server (EX3) (131.107.2.200) in order for the email to function correctly for Detroit users.
However the question relates to Chicago users not Detroit users.
CNAME record
A Canonical Name or CNAME record is a type of DNS record that links an alias name to another canonical domain name.
You’ll need to configure CNAME records if you want to use URL forwarding to create a custom web address, forward a URL to Google Sites, or forward a naked domain URL, as well as verify your site with your domain name provider.
Lastly, you may need to use CNAME records to reset the administrator password if you can’t access the Google Apps control panel because you’ve forgotten the administrator password.
Your CNAME records are stored in the DNS Zone File as pairs of key values.
The value of a CNAME record is always a domain name. CNAME records are often used to create subdomains. CNAME records are useful because they allow you to set up an alias to a server without using its IP address, through an intermediary standard domain name.
MX Record
MX records are DNS settings associated with your domain that direct its mail to the servers hosting your users’ mail accounts.
These settings are managed by your domain host, not by Google. To make sure mail always gets delivered, you typically create records for multiple servers, all of which can deliver mail to users.
That way, if one server is down, mail can be routed to another server, instead. You determine which servers get tried first by assigning priorities, using values like 10, 20, 30, and so on. The lowest value gets highest priority.
PTR Record
A DNS PTR record -for those of you who are wondering -is a special entry in the Domain Name System (DNS) that basically maps an IP address (like 65.55.12.249) to a domain name (like wwwco2vip.microsoft.com). Having a DNS PTR record for your IP address is (somewhat) a sign of reliability in the Internet, since only the owner of a specific network zone has the ability to create and edit these DNS records.
Today, most mail exchangers will check this record for each incoming connection and may abort the communication if they find your IP address does not have an associated DNS PTR entry: because of this reason, always suggest to make sure your public servers IP addresses have DNS PTR records configured properly. While EmailVerify.NET can validate email addresses even without a DNS PTR entry configured, the quality of the validation results in this event may be suboptimal.
TXT Record
A TXT record is an entry within the Domain Name System (DNS) that provides supplemental information about your domain.
A TXT (text) record is used to hold some text information. You can put virtually any free text you want within a TXT record.
A TXT record has a hostname so that you can assign the free text to a particular hostname/zone.
The most common use for TXT records is to store SPF (sender policy framework) records and to prevent emails being faked to appear to have been sent from you.
The name field of the SPF record should be left blank unless mail is sent from a subdomain such as [email protected]. If this was the case “mail” would be entered in the name field of the record.
Alternatively, of email is sent from [email protected], the name field is left blank. The data field of the record is populated with the list of hosts that are permitted to send email for the domain in SPF record format.
There are wizards which can assist in generating an SPF record available. The data field of the record must be enclosed in quotations so servers will read the value as a single string.
Below is a default SPF record for example-1.com.
NOT A
Today, most mail exchangers will check this record for each incoming connection and may abort the communication if they find your IP address does not have an associated DNS PTR entry:
Need a ptr record.
NOT B
Today, most mail exchangers will check this record for each incoming connection and may abort the communication if they find your IP address does not have an associated DNS PTR entry:
Need a ptr record.
NOT C
Need to modify the txt record for Detroit email users but not apparently for chicago email users.
D
Today, most mail exchangers will check this record for each incoming connection and may abort the communication if they find your IP address does not have an associated DNS PTR entry:
Need a ptr record.
Managing DNS Records

QUESTION 26
You need to recommend a solution for the New York office that meets the technical requirements for client access.
What should you include in the recommendation? (Each correct answer presents a complete solution. Choose all that apply.)

A.    A Layer 4 hardware load balancer
B.    A Client Access server array
C.    A Layer 7 hardware load balancer
D.    The Network Load Balancing (NLB) feature
E.    DNS round robin

Answer: AC
Explanation:
Load Balancing: Exchange 2013 Help

QUESTION 27
You need to recommend a solution to meet the mailbox creation requirements.
Which three actions should you recommend performing in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)
271
Answer:
272
Explanation:
Edit the ScriptingAgentConfig.xml.sample file, and then rename the file as
ScriptingAgentConfig.xml.
Copy the ScriptingAgentConfig.xml file to all of the Mailbox servers Run the Enable-
CmdletExtensionAgent “Scripting Agent” command
http://technet.microsoft.com/en-us/library/dd335054(v=exchg.150).aspx
Cmdlet Extension Agents
Cmdlet extension agents are components in Microsoft Exchange Server 2013 invoked by Exchange cmdlets when the cmdlets run. As the name implies, cmdlet extension agents extend the capabilities of the
cmdlets that invoke them by assisting in processing data or performing additional actions based on the requirements of the cmdlet. Cmdlet extension agents are available on any server role.
Agents can modify, replace, or extend functionality of Exchange Management Shell cmdlets. An agent can provide a value for a required parameter that isn’t provided on a command, override a value provided by a user, perform other actions outside of the cmdlet workflow while a cmdlet runs, and more.
You can use the Scripting agent cmdlet extension agent in Exchange 2013 to insert your own scripting logic into the execution of Exchange cmdlets. Using the Scripting agent, you can add conditions, override values, and set up reporting.
Every time an Exchange cmdlet is run, the cmdlet invokes the Scripting agent cmdlet extension agent. When this agent is invoked, the cmdlet checks whether any scripts are configured to be invoked by the cmdlet. If a script should be run for a cmdlet, the cmdlet tries to invoke any APIs defined in the script.
The Scripting agent configuration file contains all the scripts that you want the Scripting agent to run. Scripts in the configuration file are contained within XML tags that define the beginning and end of the script and various input parameters required to pass data to the script. Scripts are written using Windows PowerShell syntax. The configuration file is an XML file that uses the elements or attributes in the following table.
Every Exchange 2013 server includes the file ScriptingAgentConfig.xml.sample in the <installation path>\V15\Bin\CmdletExtensionAgents folder.
This file must be renamed to ScriptingAgentConfig.xml on every Exchange 2013 server if you enable the Scripting Agent cmdlet extension agent. The sample configuration file contains sample scripts that you can use to help you understand how to add scripts to the configuration file. After you add a script to the configuration file, or if you make a change to the configuration file, you must update the file on every Exchange 2013 server in your organization. This must be done to make sure that each server contains an up-to-date version of the scripts that the Scripting Agent cmdlet extension agent runs.
ScriptingAgentConfig.xml
Renamed from ScriptingAgentConfig.xml.sample on every Exchange 2013 server if you enable the Scripting Agent cmdlet extension agent.
ScrptingAgentConfig.xml.sample
Every Exchange 2013 server includes the file ScriptingAgentConfig.xml.sample in the <installation path>\V15
\Bin\CmdletExtensionAgents folder.
This file must be renamed to ScriptingAgentConfig.xml on every Exchange 2013 server if you enable the Scripting Agent cmdlet extension agent.
The sample configuration file contains sample scripts that you can use to help you understand how to add scripts to the configuration file.
Enable-CmdletExtensionAgent “Scripting Agent” command
Use the Enable-CmdletExtensionAgent cmdlet on a server running Microsoft Exchange Server 2013 to enable a cmdlet extension agent.
EXAMPLE 1 This example enables the Scripting Agent cmdlet extension agent. Before you enable the Scripting Agent, you need to make sure that you’ve first deployed the ScriptingAgentConfig.xml configuration file to all the servers in your organization. If you don’t deploy the configuration file first and you enable the Scripting Agent, all non-Get cmdlets fail when they’re run.
Enable-CmdletExtensionAgent “Scripting Agent”
Run the Set-CmdletExtensionAgent “Scripting Agent” command Use the
Set-CmdletExtensionAgent cmdlet on a server running Microsoft Exchange Server 2013 to modify a cmdlet extension agent.
EXAMPLE 1
This example changes the priority of the fictitious “Validation Agent” cmdlet extension agent to 9. Set-CmdletExtensionAgent “Validation Agent” -Priority 9 STEPS
1. Edit the ScriptingAgentConfig,xml.sample file, and then rename the file as
ScriptingAgentConfig.xml
Need to add in your own appropriate scripts
2. Copy the ScriptingAgentConfig.xml file to all of the Mailbox Servers The question refers to mailbox creation requirements but according to the above information – After you add a script to the configuration file, or if you make a change to the configuration file, you must update the file on every Exchange 2013 server in your organization. In the absence of further information, accept updating the mailbox servers over the client access servers
3.Enable- CmdletExtensionAgent “Scripting Agent” command Have to enable the cmdlet extension agent.

QUESTION 28
Hotspot Question
You need to recommend a solution to meet the business requirements for users accessing their email messages.
Which command should you include in the recommendation? (To answer, select the appropriate options in the answer area.)
281
Answer:
282

QUESTION 29
Drag and Drop Question
You are evaluating the planned deployment of the additional Exchange Server 2013 servers.
You need to meet the technical requirement for installing all of the anti-spam agents and for enabling antimalware filtering.
What should you do? (To answer, drag the appropriate servers to the correct locations. Each server may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
291
Answer:
292

QUESTION 30
You are evaluating the deployment of the additional Exchange Server 2013 servers.
You need to recommend changes to the transport configurations to ensure that all email messages sent from the Detroit office are routed through EX2.
What should you include in the recommendation?

A.    Increase the cost of the CHI-NY site link to 15.
B.    Specify an Exchange-specific cost of 20 for the CHI-DET site link.
C.    Decrease the cost of the CHI-NY and the DET-NY site links to 4.
D.    Increase the cost of the DET-NY site link to 15.

Answer: B
Explanation:
Exchange-specific cost
By default, Exchange uses the cost assigned to an IP site link for Active Directory replication purposes to compute a routing topology.
Route Mail Between Active Directory Sites: Exchange 2013 Help
NOT A C D
Need to introduce an exchange specific cost not change and AD cost B
You need to recommend changes to the transport configurations to ensure that all email messages sent from the Detroit office are routed through EX2.
All of the Detroit Users have a mailbox hosted on EX2 currently (New York)
After the planned changes all of Detroit mailboxes would be shifted to EX3. (Detroit)
The office in New York and Detroit connect to the internet directly.
In order to change the transport configuration to ensure that all email messages sent from the Detroit office are routed through EX2 an exchange specific cost has to be implemented.
B is the only answer option which achieves this.
[A40]
1. Run the New-Mailbox cmdlet
2. Run the New-ManagementRole -Parent
MyContactInformation -Name Role1
3. Run the Remove-ManagementRoleEntry
Role1 Set-User command
4. Run the Add-ManagementRoleEntry Role1Set-User
-Parameters Office, Homephone
5. Run the New-RoleAssignmentPolicy -Name Policy1
-Roles MyBaseOptions, Role1,
MyVoiceMail, MyTextMessages, MyTeamMailboxes,
MyMarketPlaceApps, MyDistributionGroupMembership

Case Study 4: Proseware, Inc (QUESTION 31 ~ QUESTION 37)
Overview
General Overview
Proseware, Inc., is an international manufacturing company that has 3,000 users. Proseware has a sales department, a marketing department, a research department, and a human resources department. Proseware recently purchased a small competitor named Contoso, Ltd.
Physical Locations
Proseware has two offices.
The offices are located in New York and London.
The offices connect to each other by using a WAN link.
Each office connects directly to the Internet.
Contoso has one office in Chicago.
Existing Environment
Active Directory Environment
The network of Proseware contains an Active Directory forest named proseware.com. The forest contains a single domain and two sites named London and New York. Each site contains two domain controllers that run Windows Server 2008 R2. The domain controllers in the New York site are named DC1 and DC2. The domain controllers in the London site are named DC3 and DC4. All FSMO roles are hosted on DC3 and DC4. The network of Contoso contains an Active Directory forest named contoso.com. The forest contains five domain controllers and one site.
Exchange Server Organization
Proseware has an Exchange Server 2013 organization that contains two database availability groups (DAGs) named DAG-NYC and DAG-LON. The DAGs are configured as shown in the following table.
The certificate used for Exchange Server 2013 has a subject name of mail.proseware.com and a Subject Alternative Name (SAN) of autodiscover.proseware.com. Each mailbox database has three copies. All users connect to an active copy of the database on a server in their respective office. Native data protection is implemented. NTLM communication is used exclusively for Outlook Anywhere both internally and externally.
Problem Statements
Proseware identifies the following issues:
– Users report that sometimes, they fail to access the free/busy information of the other users. You also discover that some users fail to retrieve Autodiscover settings.
– Users in the London office report that during a 24-hour WAN outage, they could see only new users in the global address list (GAL) from Outlook Web App.
– The manager of the human resources department in the New York office cannot see new London office users in the GAL until several hours after the help desk confirms that the users were created.
– A hung MSExchangeOWAAppPool in Internet Information Services (IIS) on EX1 causes all of the database copies to fail over. Despite having the same CopyQueueLength and ReplayQueueLength as the copies on EX2, the copies on EX3, which have a higher activation preference, are activated, forcing user connections over the WAN.
– A custom application named Appl recently malfunctioned and sent hundreds of false positive email notifications that had a subject of System Alert: Sales Database Reaching Capacity to all of the users in the organization. While attempting to remove the email messages, an administrator ran the Search-Mailbox -DeleteContent command and erroneously deleted valid email messages from the mailboxes of some executives.
Requirements
Business Goal
Proseware identifies the following business goals:
– Reduce the costs associated with using bandwidth on the WAN links.
– Improve social media integration by using a Microsoft Outlook app that will be deployed to all of the users in the sales department.
Planned Changes
Proseware plans to make the following changes:
– Implement a lagged copy for the mailbox database of the executives.
– Implement an RBAC-linked role group for the administrators at Contoso to manage the mailboxes of the Proseware users.
Technical Requirements
Proseware identifies the following technical requirements:
– End users must be notified after one hour if the email messages that they send are not delivered.
– If mailbox database storage fails, the IT department must be able to recover old email messages that were sent up to five days earlier to the mailboxes of the executives.
– All new users hired at Contoso must have a user account in contoso.com and an Exchange Server mailbox in proseware.com. All new user accounts in contoso.com must have a user principal name (UPN) that ends with proseware.com.
– Administrators at Contoso must be able to create and manage recipient objects in the Exchange Server organization of Proseware by using their existing contoso.com administrator account. All Contoso recipient objects must reside in an organizational unit (OU) named proseware.com.
Security Requirements
The Chief Security Officer (CSO) introduces the following security requirements:
– All Outlook users who connect from the Internet must use Basic authentication only.
– All Outlook users who connect from the internal network must use NTLM authentication only.
SLA Requirements
Due to productivity losses during some recent maintenance windows, the Chief Information Officer (CIO) introduces a new service level agreement (SLA) requiring that all servers entering or exiting a maintenance window must be taken in and out of service properly.
The SLA contains the following requirements:
– All mounted databases on the server undergoing maintenance must be activated on another server.
– All message queues on the server undergoing maintenance must be empty before maintenance can begin.
– The server undergoing maintenance must be prevented from becoming a Primary Active Manager (PAM).
– Databases copies on the server undergoing maintenance must not be activated while maintenance is occurring.

QUESTION 31
Hotspot Question
You are attempting to resolve the database activation issue.
You need to identify why the database copies are activated on EX3 instead of EX2.
Which command should you use? (To answer, select the appropriate options in the answer area.)
311
Answer:
312

QUESTION 32
Drag and Drop Question
You need to identify which commands must be run to perform the maintenance window tasks. Which commands should you run? (To answer, drag the appropriate commands to the correct tasks. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
321
Answer:
322

QUESTION 33
You need to recommend which command must be run to remove the email notifications from all of the servers if App1 malfunctions again.
Which command should you recommend? (To answer, configure the appropriate options in the answer area.)
331
Answer:
332

QUESTION 34
You are implementing a solution to meet the security requirements for Outlook authentication. You purchase a new certificate that has a subject name of mail.proseware.com and SANs of autodiscover.proseware.com and oa.proseware.com.
You create a host (A) record for oa.proseware.com in the public DNS zone.
Remote users report that they fail to connect to their mailbox by using Outlook.
You need to ensure that the remote users can connect to their mailbox from Outlook.
The solution must meet the security requirements.
Which two commands should you run? (Each correct answer presents part of the solution. Choose two.)

A.    Set-OutlookProvider EXPR -CertPrincipalName msstd:mail.proseware.com
B.    Set-OutlookAnywhere -ExternalHostName oa.proseware.com –ExternalClientAuthenticationMethod Basic -ExternalClientsRequireSsI $true –InternalHostName mail.proseware.com –InternalClientAuthenticationMethod NTLM –
InternalClientsRequireSsI Strue
C.    Set-OutlookProvider EXPR -CertPrincipalName msstd:oa.proseware.com
D.    Set-OutlookAnywhere -ExternalHostName mail.proseware.com-ExternalClientAuthenticationMethod Basic -ExternalClientsRequireSsI $true –InternalHostName oa.proseware.com -InternalClientAuthenticationMethod NTLM –
InternalClientsRequireSsI $true

Answer: AB
Explanation:
Set-OutlookProvider EXPR
The common benefit of enabling Outlook Provider, is to assure Outlook client connecting to a specific server, which has a specific name in subject name field on the certificate. Set-OutlookProvider EXPR -CertPrincipalName msstd:mail.contoso.com
Running above command will force Outlook client “Only connect to proxy servers that have this principal name in their certificate” to be enabled and value set to msstd:mail.contoso.com.
If client connects to a proxy server, which does not have mail.contoso.com in subject name field in the certificate, the connection will fail.
Set-OutlookAnywhere
Use the Set-OutlookAnywhere cmdlet to modify the properties on a computer running Microsoft Exchange Server 2013 enabled for Microsoft Outlook Anywhere.
The ExternalHostname parameter specifies the external host name to use in the Microsoft Outlook profiles for users enabled for Outlook Anywhere.
The InternalHostname parameter specifies the internal hostname for the Outlook Anywhere virtual directory.
A
Subject name of the certificate is mail.proseware.com not oa.prosware.com
NOT C
Subject name of the certificate is mail.proseware.com not oa.prosware.com
B
ExternalHostName oa.proseware.com is correct as oa.proseware.com is a host (A) record in the public DNS zone.
NOT D
ExternalHostName mail.proseware.com is NOT correct as oa.proseware.com is a host (A) record in the public DNS zone.
http://technet.microsoft.com/en-us/library/bb123683(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/bb123545(v=exchg.150).aspx

QUESTION 35
You need to recommend which actions must be performed to meet the technical requirements for the new Contoso users.
Which three actions should you recommend? (Each correct answer presents part of the solution. Choose three.)

A.    Configure UPN suffix routing.
B.    Configure Contoso to trust Proseware.
C.    Configure Proseware to trust Contoso.
D.    Run the New-Mailbox cmdlet and specify the -AccountDisabled parameter.
E.    Run the New-Mailbox cmdlet and specify the -LinkedMasterAccount parameter.
F.    Create a linked role group.

Answer: ACE
Explanation:
http://technet.microsoft.com/en-us/library/cc731404.aspx
UNDERSTANDING TRUST DIRECTION
PROSEWARE CONTOSO
USER ACCOUNT IN CONTOSO NEEDS TO OBTAIN ACCESS TO MAILBOX IN PROSEWAR
E.INC DIRECTION OF TRUST IS FROM PROSEWARE TO CONTOSO.
THAT IS PROSEWARE NEEDS TO TRUST CONTOSO,
A
All new user accounts in contoso.com must have a user principal name (UPN) that ends with proseware.com
Configure UPN suffix routing
Name suffix routing is a mechanism that you can use to manage how authentication requests are routed across Active Directory forests that are joined by forest trusts.
NOT B
AS PER ABOVE DIAGRAM PROSEWARE NEEDS TO TRUST CONTOSO
C
AS PER ABOVE DIAGRAM PROSEWARE NEEDS TO TRUST CONTOSO
E
All new users hired at Contoso must have a user account in contoso.com and an Exchange Server mailbox in proseware.com
Use the New-Mailbox cmdlet to create a user in Active Directory and mailbox-enable this new user.
The LinkedMasterAccount parameter specifies the master account in the forest where the user account resides. The master account is the account to link the mailbox to.
The master account grants access to the mailbox. This parameter is required only if you’re creating a linked mailbox.
A linked mailbox is a mailbox that’s associated with an external account. The resource forest scenario is an example of a situation in which you would want to associate a mailbox with an external account. In a resource forest scenario, user objects in the Exchange forest have mailboxes, but the user objects are disabled for logon. You must associate these mailbox objects in the Exchange forest with enabled user objects in the external accounts forest.
NOT D
Need to use linked mailboxes.
Use the New-Mailbox cmdlet to create a user in Active Directory and mailbox-enable this new user.
The AccountDisabled parameter specifies whether to create the mailbox in a disabled state.
You don’t have to specify a value with this parameter.
NOT F
Need to use linked mailboxes.
You can use a linked management role group to enable members of a universal security group (USG) in a foreign Active Directory forest to manage a Microsoft Exchange Server 2013 organization in a resource Active Directory forest.
By associating a USG in a foreign forest with a linked role group, the members of that USG are granted the permissions provided by the management roles assigned to the linked role group.
For more information about linked role groups, see Understanding Management Role Groups.
http://technet.microsoft.com/en-us/library/aa997663(v=exchg.150).aspx

The 70-341 PDF dumps and 70-341 practice test with free VCE player are available on GreatExam now. Get a complete hold of them through GreatExam to give your career a boost and start earning your Microsoft certification today!

http://www.greatexam.com/70-341-exam-questions.html